Beier UFR-1230 Speed Control ESC
Roll over image to zoom in
Beier UFR-1230 Speed Control ESC

Beier UFR-1230 Speed Control ESC

Hobbyconcepts
Price:
$139.99

Description

The UFR-1230 at a glance:

  • Speed controller for brushed DC motors
  • Designed specially for trucks and other vehicles
  • Supply voltage: 6 - 18 V
  • Maximum motor current: 30 A
  • Powerful BEC with 5,6 V, 3 A
  • 8 switching-outputs for lights
  • Optional: load regulation, cruise control, different brake funktions
  • Additional options adjustable with the software "UFR-1230 Drive-Teacher"

Description

The speed controller has been designed especially for RC vehicles with brushed DC motors.

The realistic and sensitive road performance ensures a lot of driving fun.

With various setting options the speed controller can be easily adjusted to all model requirements and driving behaviours. All settings can be set with DIP switches and the software "UFR-1230 Drive-Teacher".

The speed controller is equipped with 8 switching outputs to connect LEDs and other lights. In addition the module has an extra output for connecting the infrared light module LM-IR-16-4 directly to the speed controller.

All light and additional functions can be controlled with nautic and multiswitch modules.

The speed controller UFR-1230 has following characteristics:

  • Supply voltage 6 - 18 V
  • Maximum motor current 30 A (short-term 60 A)
  • PWM pulse frequency 20 or 40 kHz
  • 8 switching outputs for lights (for instance for braking, driving backwards, parking, flashing)
  • Powerful BEC with 5,6 V and 3 A continous current (short circuit proof)
  • 3 proportional channels (throttle, steering, and control channel)
  • 2 Proportionalausgänge (output for sound module and steering servo)
  • Additional functions controllable with nautic and multiswitch modules
  • Failsafe in case of receiver signal disturbances (motor stop)
  • Protection when switching on supply voltage
  • Output for infrared diode for light module LM-IR-16-4 in trailer
  • Battery voltage monitoring
  • Temperatur monitoring
  • Short circuit protection at motor output stage

Options adjustable with DIP schwitches:

  • Load regulation on / off
  • Cruise control on / off
  • Brake function on / off
  • Parking brake on / off
  • Choice of battery type: LiPo / other
  • Teaching function (setup) for throttle channel on / off

Additional functions are adjustable with the Windows-software "UFR-1230 Drive-Teacher" and the data cable K-USB-2 (optional available):

  • Firmware update
  • Diagnosis
  • Invertion of channels
  • Deactivation of low voltage monitoring
  • Reduction of driving backwards speed by 50 %
  • Selection of PWM pulse frequency between 20 or 40 kHz (for bell-armature motors)
  • Adjustment of load regulation
  • Activation / adjustment of inertia
  • Activation / adjustment of steering inetria
  • Adjustment of hand brake sensitivity
  • Adjustment of throttle curve
  • Configuration of switching outputs (output types, brightness, Xenon effects, etc.)
  • Configuration of light switch (controllable with prop. channel)
  • Configuration of control channel
  • Configuration of nautic / multiswitch modules
  • Configuration of servo outputs of light module LM-IR-16-4

The speed controller is delivered ready for operation with a standard configuration (see screenshot in operating manual). The data cable is only required in case settings in the UFR-1230 Drive-Teacher need to be changed.

Free download of the windows software "UFR-1230 Drive-Teacher" with following link: Download (2 MB)

You can find additional information in the operating manual UFR-1230 (PDF).

 

Technical data

Supply voltage (Ub): 6 – 18 V DC
Power consumption: Stand-by current: approx. 40 mA
Motor current: max. 30 A continous current, 60 A short-term current (1 minute)
BEC voltage: 5,6 V
BEC current: max. 3 A continous current, 5 A short-term current (10 seconds)
Proportional inputs: 3 pieces (1,000 - 2,000 ms)
  • Throttle channel
  • Steering channel
  • Control channel
Proportional outputs: 2 pieces (1,000 - 2,000 ms)
  • Output for sound module
  • Servo output for steering
Switching outputs: 8 pieces (npn–open collector), max. 1,5 A per output, the sum of all outputs must not exceed 3,0 A
Protection features:
  • Short circuit protection at motor output stage
  • Short circuit protection at switching outputs
  • Short circuit protection at BEC
  • Temperature monitoring
  • Battery voltage monitoring
  • Protection while switching on power supply
  • Failsafe for proportional inputs
Additional ports:
  • Programming interface for data cable
  • Port for infrared diode of light module LM-IR-16-4
Cables for connection:
  • Battery connection: 2 x 2,5 mm², length approx. 25 cm (with Deans T connector)
  • Motor connection: 2 x 2,5 mm², length approx. 25 cm
  • Receiver connection with servo cable: 3 x 0,14 mm², length approx. 30 cm
Permitted ambient temperature: 0 – 60° C
Permitted humidity: Max. 85 %
Size: 65 x 45 x 23 mm
Weight: 75 g

Payment & Security

American Express Apple Pay Discover Google Pay Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed